Discover jobs
Job Search
drywall installer
Posted on August 29, 2024 by Employer details Brar Drywall
Job details
Education: Secondary (high) school graduation certificate. Tasks: Instruct apprentices. Supervise other workers. Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Cure freshly plastered surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install exterior and interior steel studs. Work at heights, on scaffolding or swing stages. Experience: 1 year to less than 2 years.- Location2675 Mitchell StreetAbbotsford, BCV2T 5G6
- Workplace information On site
- Salary$31.00HOUR hourly / 35 hours per week
- Terms of employment Permanent employmentFull time
- Starts as soon as possible
- vacancies 4 vacancies
- Source Job Bank #3061053
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
1 year to less than 2 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
- Instruct apprentices
- Supervise other workers
- Apply successive coats of compound and sand seams and joints
- Apply, level and smooth coats of plaster
- Cure freshly plastered surfaces
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install exterior and interior steel studs
- Work at heights, on scaffolding or swing stages
Who can apply to this job?
The employer accepts applications from:
- Canadian citizens and permanent or temporary residents of Canada.
- Other candidates with or without a valid Canadian work permit.
Advertised until
2024-11-20
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
- Date modified: